High performance electrophoretic paint The curing temperature is: UV curing for 5-7 minutes, and the flash evaporation temperature during curing is as low as 60-70 ℃, Adapt to products that cannot be baked at high temperatures; The hardness of the paint film can reach more than 5H, and the transmittance is above 85 degrees.
Bathroom electrophoretic paint is: UV curing for 5-7 minutes, and the flash evaporation temperature during curing is as low as 60-70 ° C, suitable for products that cannot be baked at high temperatures; The hardness of the paint film can reach more than 5H, and the transmittance is above 85 degrees.
VSK-58 Cathodic acrylic matte electrophoretic paint, this electrophoretic paint is synthesized with resin and self-crosslinking to form a film to become matte, without adding matte paste (matte powder), the matteness can reach 20° on the bright nickel layer Stablize.
VSK-2088 is a high-decorative acrylic cathodic electrophoretic paint that provides excellent high-decorative properties, good gloss (130°) and wide adjustable range. Therefore, the new acrylic cathodic electrocoat can be used with water-based and oil-based color base pigments with uniform color, and can also be used alone as a transparent electrocoat as a surface coating.
VSK-2055 is a new high performance acrylic cathodic electrocoat that provides excellent corrosion resistance, very strong throwing transmittance (150mm), good gloss (130°) and wide adjustable range. Therefore, the new acrylic cathodic electrocoat can be used with water-based and oil-based color base pigments with uniform color, and can also be used alone as a transparent electrocoat as a surface coating.
VSK-12Y water-based matte touch paint is configured with matte paint. Its gloss can reach a matte effect below 20°, and the paint is extremely delicate and has a smooth hand effect. Its performance fully meets the national standard GB/T5237.5-2017 standard, and has a QUV resistance of more than 4000 hours.
VSK-12LJ water-based crystal swimming paint is suitable for surface coating of metal workpieces, and can replace various solvent-based baking coatings for decoration and protection of metal surfaces. The water-based crystal swimming paint coating has high hardness and good flexibility, and has excellent adhesion performance on the surface of aluminum profile products.
VSK-12LM water-based mahogany paint, wood grain paint is a water-based electrostatic spray paint. Water-based mahogany paint can be used to make red sandalwood, red sandalwood, ebony and other paints without wood grain effect. Water-based wood grain paint can make red sandalwood, red sandalwood, ebony and other paints with wood grain effect, without the need for wood grain transfer The wood grain effect can be made directly by spraying, which can reduce the production process of the aluminum profile when making the wood grain effect. Its performance fully meets the national standard GB/T5237.5-2017 standard, and has more than 4000 hours of QUV resistance test.
VSK-12FT water-based fluorocarbon paint is made of 70% water-based fluorocarbon resin and organic pigments. It has excellent water resistance, anti-pollution, corrosion resistance, UV resistance, etc., and has good wear resistance and good adhesion. Organic pigments with a resistance of more than 4000 hours of QUV, more suitable for outdoor products. Its performance fully meets the national standard GB/T52375-2017.
This process does not do anodizing treatment on the surface of the aluminum profile, and uses cathodic electrophoretic paint to make an antique copper wire drawing effect. It has passed the QUV ultraviolet test for more than 3000 hours, and the theory of outdoor exposure can reach at least 6 years without discoloration.
Polyimide masterbatch products are used for injection molding. The performance reaches the level of similar products in Japan, which is higher than that of similar products in the United States. Due to military use, the US Congress has adopted a strategy of banning the sale of high-end thermoplastic polyimide materials to China, and only low-end products can be sold to China.
According to different product needs, there are two types of polyimide solution products developed, which are: Thermoplastic BLS-120 (low viscosity type) Thermosetting BLG-120 (high temperature type)
Polyimide profiles are made of thermoplastic/thermosetting powder materials through high temperature and high pressure processing. Dimensions and specifications can be customized. The material is mainly used in aviation, aerospace and rocket parts, heat insulation, seals, petrochemical, precision instruments and other fields.
The product is a truly fully soluble polyimide (PI) without the precursor - polyamic acid. The glass transition temperature (Tg) of the product is 320-330 °C, the temperature of thermal weight loss is about 525 °C, the intrinsic viscosity is 0.5-0.7dl/g (in NMP, 30 °C test), the product is 100% imidized, pure solid powder. At room temperature, it is soluble in common solvents. The dissolved concentration can reach more than 20%.
It is not easy to overflow during the molding process, which greatly improves the molding efficiency and yield of the molded products. The PI powder has uniform fineness and an average particle size of 800 meshes. The molded products have high transparency and light color. 20 products. This product has high temperature resistance, wear resistance, self-lubrication, high mechanical strength, radiation resistance, and good dimensional stability at high temperature.
Product features: high gloss, low spray viscosity, high solid content, excellent leveling and weather resistance; it can be matched with amino resin and HDI curing agent to adjust products with different requirements;
This product is polymerized from acrylic acid and its lipid monomers and other special processes. The product is suitable for surface protection and decorative coating resins such as glass and metal workpieces with performance requirements (such as weather resistance, optical transparency, etc.); The finished coating has excellent adhesion performance and optical transparency; high gloss, good leveling, excellent weather resistance; high hardness, good wear resistance, good chemical resistance; mainly used in the manufacture of water-based varnishes and paints
Product features: high gloss, low spray viscosity, high solid content, excellent leveling and weather resistance; it can be matched with amino resin and HDI curing agent to adjust products with different requirements;
This product is polymerized from acrylic acid and its lipid monomers and other special processes. The product is suitable for surface protection and decorative coating resins such as glass and metal workpieces with performance requirements (such as weather resistance, optical transparency, etc.); The finished coating has excellent adhesion performance and optical transparency; high gloss, good leveling, and excellent weather resistance; mainly used in the manufacture of water-based varnishes and paints
This product is mainly made of hydrophobic monomer by special process polymerization, especially suitable for continuous multiple spraying without baking process, it has strong adhesion to aluminum profiles, stainless steel, model gold substrates, and is suitable for primers;
WeChat
Product customer
